CPWS-Precision workholding fixture for chip removal EROWA UPC chuck Universal Power Chuck

 

UPC Chuck with ITS integrated

ER-070649UPC chuck with ITS Chuck 100 P

Enlarge image
Request offer





 
VersionUPC with ITS chuck 100P fitted and aligned.ConnectionsThrough the base and on the side.ApplicationOn milling, grinding, drilling and EDM sinking centers. In production lines.
Technical data UPC
Repeatability 0.002 mm

Indexing 4 x 90° divisible, pallet position-oriented

Chuck clamping power 32’000 N, generated by springs

Chuck opens with 6 bar air pressure, dry

Recommended workpiece size: 500x500x350 (20x20x14″)mm

  Operating manual

Request PDF  

UPC P Chucks

ER-016841UPC P chuck

Enlarge image
Request offer





 
VersionChuck for high machining forces during chip removal.ConnectionsThrough the base and on the side.ApplicationOn milling, grinding, drilling and EDM centers and in production lines.OptionUPC Sealing-Set ER-016650.

  Operating manual

Request PDF  

ER-030581UPC P / PowerChuck P kit automatic
composed of:

Enlarge image
Request offer





 
VersionUPC P with air dock for the automatic operation of PowerChuck P.Content1 x ER-028784, UPC P with air duct and UPC seal kit

1 x ER-030580, PowerChuck P on UPC pallet with air duct

1 x Pneumatic tube.Requirements*At least 4 air ducts available on the machine table.

*Air ducts for the PowerChuck P are only possible laterally. If required, spacer plate can be used.Please noteFurther system adaptations on request!

  Operating manual

Request PDF  

ER-078728UPC P with connection on TK 57 mm
with 2 air docks

Enlarge image
Request offer





 
VersionChuck for high machining forces during chip removal.ConnectionsThrough the base on pitch circle 57 mm and on the side.ApplicationFor milling, grinding, drilling and EDM centers and in production lines.OptionUPC Sealing kit ER-016650 and ER-030580. Further system adaptations on request.
Technical data UPC
Repeatability 0.002 mm

Indexing 4 x 90° 

Clamping force 50’000 N, generated by springs

Chuck opens with 6 bar air pressure, dry

Recommended workpiece size: 500x500x500 mm(20x20x20″)

  Operating manual

Request PDF  

UPC Standard Chuck

ER-074524UPC chuck

Enlarge image
Request offer





 
VersionUPC, prepared to accommodate an ITS chuck 100P.ConnectionsThrough the base and on the side.ApplicationOn milling, grinding, drilling and EDM sinking centers. In production lines.
Technical data UPC
Repeatability 0.002 mm

Indexing 4 x 90° divisible, pallet position-oriented

Chuck clamping power 32’000 N, generated by springs

Chuck opens with 6 bar air pressure, dry

Recommended workpiece size: 500x500x350mm (20x20x14″)

 

CPWS is China manufacturer of precision workholding for chip removal，CNC machining centers，CPWS is compatible with EROWA,at lower cost, good precision，ER-070649  ER-016841 ER-074524 ER-030581  ER-078728  
www.workholdingtool.com,sara@workholdingtool.com
www.erowa-system3r-edm.com

 

The post CPWS-Precision workholding fixture for chip removal EROWA UPC chuck Universal Power Chuck appeared first on CPWS®-China Precision Workholding System Inc.